Hervé Ribet Stummelflitzer Z-1 Type R Project:

Shown on the right is designer Lynn Williams impression of the Stummelflitzer Z-1 Type R. Lynn can be contacted
Lynn Williams flitzer@btopenworld.com

Located in France Hervé Ribet is well underway with this project and has recently taken delivery of the Rotec R2800 that will power the plane.

An exciting project for all concerned and we'll be looking forward to regular progress reports and pictorial updates..

From Rotec's perspective the project begins on receipt of the following Email:

From: herve ribet
Sent: Saturday, 27 August 2005
To: Rotec
Subject: engine

Hi,

Just some news: the engine and the propeller is in my workshop, fantastic peace of metal, marvelous work, you've excelled yourselves.

Thanks and Salutations Hervé.

Just a question: It'll be some time before I install the R2800, I suppose that the engine can stay in the box for the next two or three months (?) or what is the storage procedure? (Rotec replied: you need to follow storage procedure and apply oil or a surface protectant to the cylinders - remove the plugs spray into each pot and with the plugs out rotate the engine using the prop or a lever through half a dozen turns very slowly... repeat ever month)

So the project begins and on the 6th of May the first photographs arrive:

R2800 Mount ...

.. ..
Mock up of the R2800 against the Flitzer fuselage...

(as usual click on the thumbnail to expand the picture...)

.. .
Oil tank ...